Dưới đây là những mã lỗi thường gặp ở máy in brother, bằng nguyên bản tiếng Anh, mình sưu tầm được và chia sẽ lại. Nên mình để nguyên bản tiếng Anh, các bạn có thể đọc nếu không hiểu có thể nhờ anh GOOGLE dịch giúp nhé !!!

Mã lỗi: Error: E60
Diễn Giải: Malfunction of fan: The printer has four cooling fans and a fault has been detected in one of them.
Cách xử lý: Switch the printer off and back on again. If error persists you will need an engineer to determine which fan is faulty and replace it.

Mã Lỗi: Replace PF Kit
Diễn Giải: This means that the paper pick-up rollers and separation pads have reached the end of their expected life cycle
Cách xử lý: When the paper feed kit needs replacing the printer may start to experience paper jams. You will need an engineer to replace these.

Mã lỗi: Replace Fuser Unit
Diễn giải: This means that the fuser unit has reached the end of its expected life cycle
Cách xử lý: When the fuser unit becomes worn it can cause poor quality print and paper jams. You will need an engineer to replace the fuser unit.

Mã Lỗi: Replace Laser Unit
Diễn giải: This means that the laser unit has reached the end of its expected life cycle
Cách xử lý: When the laser unit becomes worn it can cause a deterioration in the print quality. You will need an engineer to replace the laser unit.

Mã lỗi: Clean Drum Unit
Diễn giải: This means that the printer has detected dust or loose toner around the drum unit.
Cách xử lý: Remove toner unit and clean off any dost or toner from the unit. There is a blue tab at the front of the drum unit. Slide this from side to side making sure to return it to its' home position and reinsert it into the machine. If message persists, replace drum unit.